Heating & Hot Water Heat Pump All-in-One
ALC-HP-AIO
An all-in-one heat pump that covers both central heating and domestic hot water from a single appliance with its own integral cylinder. It gathers free warmth from the air and lifts it to the temperature the home needs, so one unit replaces a boiler and a separate hot water cylinder. It runs on R290, a natural refrigerant with a very low environmental impact, and suits new builds and full retrofits alike.
Watch how it works (24 s)
Specification
| Heating capacity | 2.25 kW heat pump + 3/5/8 kW backup |
|---|---|
| Refrigerant | R290 (150 g) |
| Tank capacity | 180 L hot water + 65 L buffer (duplex stainless steel 2101) |
| Power supply | 220–240 V, 50 Hz, single phase |
| Max. outlet temperature | 75°C |
| Noise level dB(A) | 49 dB(A) |
| Dimensions | Ø 640 × 1910 mm |
| Weight | 97 kg (112 kg packed) |
| COP (A7/W35) | 2.955 (hot water) |
| Operating air temperature | −7 to 45°C |
| Energy class | A+ |
| Load profile | L |
| Heat-up time | 6.42 h |
| Max mixed water at 40°C | 195 L |
| Rated input | 410 W |
| Hot water electric heater | 3 kW |
| Heating electric heater | 3 kW + 5 kW (8 kW total) |
| Air duct diameter | 180 mm |
| Warranty | 2 years parts; 3 years compressor |
Documents
Compliance documents and manuals are available to registered trade customers, installers and SEAI on request. Please request access and we will respond promptly.
KEYMARK CertificateRequest access
Energy LabelRequest access
ErP ReportRequest access
Installation manual (PDF, 2.7 MB)