Exhaust-Air Heat Pump All-in-One, Single or Three-Phase
ALC-HP-EA-203PNEW
An indoor all-in-one heat pump with an integrated hot water tank, finished with a black top cover and white tank. It recovers heat from the home's exhaust air through top-blow duct connections and transfers it to the water via a shell-mounted copper-coil heat exchanger. One model can be wired for single-phase or three-phase supply at installation, so it suits houses and light commercial settings alike, and it runs on R290, a natural refrigerant with a very low environmental impact.
Watch how it works (24 s)
Specification
| Heating capacity | 2 kW heat pump |
|---|---|
| Refrigerant | R290 (300 g) |
| Tank capacity | 180 L rated, duplex stainless steel 2101 (1.0 MPa max, 45 mm insulation) |
| Power supply | Single-phase 230 V or three-phase 380–415 V 3N~, 50 Hz, selected at installation |
| Max. outlet temperature | 70°C (default 53°C) |
| Noise level dB(A) | 49 dB(A) |
| Dimensions | Ø 640 × 1590 mm |
| Weight | 96 kg (110 kg packed) |
| COP (A7/W35) | 2.955 (hot water) |
| Operating air temperature | −7 to 45°C |
| Max input (three-phase figure) | 8,200 W, 15.6 A |
| Rated input | 560 W |
| Electric heater (hot water) | 1,500 W |
| Electric heater (heating) | 3 × 2,000 W |
| Water-heating efficiency | 122.7% or better |
| Energy class | A+ |
| Load profile | L |
| Heat-up time | 5 h |
| Max mixed water at 40°C | 220 L |
| Protection | IPX1 |
| Compressor | Fixed-speed twin-rotary |
| Connections | G1 hot/cold; air duct diameter 180 mm |
| Controller | Colour touchscreen with WiFi, SG Ready, Modbus |
| Finish | Black top cover, white tank; copper-coil version |
| Energy label | No energy label yet |
| Warranty | 2 years parts; 3 years compressor |
Documents
Compliance documents and manuals are available to registered trade customers, installers and SEAI on request. Please request access and we will respond promptly.
KEYMARK CertificateRequest access
Energy LabelRequest access
ErP ReportRequest access
Installation manual (PDF, 2.7 MB)