4kW Solar Kits
4kW solar PV kit with 5kWh battery storage.
This 4kW solar system could be suitable for the SEAI Warmer Homes Scheme. Suitability is subject to SEAI eligibility and technical requirements and has not yet been confirmed.
Photos

Kit contents
- 10 x 450W all-black TOPCon panels
- 3.6kW single-phase hybrid inverter
- 5kWh LiFePO4 low-voltage battery
- PV cable
- MC4 connectors
- Roof mounting system
Key features
High-efficiency N-type TOPCon panels with module efficiency of up to 23.35%, placing them in the upper tier of solar modules currently available. Higher efficiency means more electricity from the same roof area, which is valuable where roof space is limited.
- Total PV array 4.5kWp
- All-black N-type TOPCon bifacial dual-glass panels
- Hybrid inverter with battery backup (UPS switchover under 10ms)
- 5.22kWh LiFePO4 battery, 90% depth of discharge, over 6000 cycles
- Expandable up to 8 batteries in parallel
- IP65 inverter and battery
- AFCI arc-fault protection and rapid shutdown
- Wi-Fi/4G monitoring
Specifications
| Panel power | 450W |
|---|---|
| Panel size | 1762 x 1134 x 30mm |
| Panel weight | 24.5kg |
| Module efficiency | Up to 23.35% (22.5% for the 450W model) |
| Panel cell type | 182 x 95.8mm TOPCon, 108 half-cells |
| Panel max system voltage | 1500V DC |
| Panel warranty | 30-year linear power output guarantee |
| Inverter rated power | 3.6kW single phase |
| Inverter AC voltage | 220/230V 50Hz |
| Inverter max PV input | 5.4kW, MPPT range 80-500V |
| Inverter max efficiency | 97.6% |
| Inverter enclosure | IP65 |
| Battery nominal capacity | 5.22kWh (51.2V, 102Ah) |
| Battery chemistry | LiFePO4 |
| Battery depth of discharge | 90% |
| Battery cycle life | 6000+ at 25°C, 0.5C |
| Battery max discharge power | 3840W |
Module efficiency is the proportion of sunlight a panel converts into electricity. Most solar panels on the market today achieve around 20 to 22%.
Certifications and downloads
Compliance documents are available to registered trade customers, installers and SEAI on request.
Inverter approvals listed in the datasheet include G98/G99 and EN 50549-1.
